1. Prepare the workspace
Clear your workbench of debris. Attach the anti-static wrist strap to a grounded surface. Lay out all components in the order listed above.
Instructions by
demo
Advanced Assembly Techniques
Detailed instructions for experienced users covering multi-component assembly, calibration, and quality checks.
Tools
| Part | Qty |
|---|---|
| Torque wrench | 1 Piece(s) |
| Digital caliper | 1 Piece(s) |
| Anti-static wrist strap | 1 Piece(s) |
Materials
| Part | Qty |
|---|---|
| Main chassis | 1 Piece(s) |
| Circuit board assembly | 1 Piece(s) |
| Thermal paste | 1 Tube(s) |
| Cable harness | 1 Piece(s) |
-
-
2. Mount the circuit board
Lower the circuit board assembly into the chassis slot. Align the four corner holes with the standoffs. Secure with M3 screws torqued to 0.5 Nm.
-
3. Apply thermal paste and attach heatsink
Apply a pea-sized amount of thermal paste to the processor. Place the heatsink directly on top and press firmly. Secure with the spring-loaded clips.
-
4. Connect cable harness and verify
Route the cable harness through the chassis channels. Connect each plug to its labeled header on the circuit board. Use the digital caliper to verify connector seating depth is within 0.5mm tolerance.